- The working size is 1300mm*2500mm*200mm,for the Z axis can be increased.
- 9kw Italy HSD ATC spindle with 11kw Taiwan DELTA inverter(top brand in the world,global warranty service).
- Germany SIEMENS servo system (famous brand in the servo system).
- Germany SIEMENS control system (famous brand ,mulifunctional ,and longer life time).
- With linear tool changer, constructed with world-class components, consistent high performance.
- Featuring Italian high frequency air-cooling electronic spindle and world-class servo motor and driving system.
- Rigid vacuum table with grids and T-slots maximizes the vacuum hold-down power and also enables you to clamp the workpiece in place.
- Taiwan Original TBI ball screw for Z travel.
- Taiwan HIWIN Linear guide.
- the Linear tool storage with 8 pieces.
- Working Size: 1300*2500*200mm(Can be customized)
- Traveling Positioning Accuracy: ±0.03/300mm
- Repositioning Accuracy: ±0.03mm
- Spindle Power: 9KW Italy HSD ATC air cooling spindle
- Spindle Speed: 24000RPM
- X, Y axis: Helical rack, Hiwin 25# Rail Linear Bearing
- Z axis: Hiwin Rail 25# Linear Bearing & TBI Ball Screw
- Max. Rapid Travel Rate: 40000mm/min
- Max. Working Speed: 25000mm/min
- Servo motor driver: Germany SIEMENS servo motor and driver
- Inverter: 11kw DELTA inverter
- Control System: Germany SIEMENS 808D control system
- Table surface: T-slot & vacuum Table
- Frame: Welded Structure
- Collet: ISO30
- X,Y Resolution: <0.01mm
- Software Compatibility: Type3/UcancameV9/Artcam Software
- Running Environment Temperature: 0 – 45 Centigrade
- Relative Humidity: 30% – 75%
Italy 9kw HSD Air Cooling Spindle
Top brand of the world. Spindle speed: 0-24000RPM
SIEMENS 808D Controller
Thanks to its panel based design philosophy, and IP65’s protection level, the SINUMERIK 808 series is ideal for harsh environments.
ATC Tool Magazine
1325 automatic tool changer magazine with 8 tools.
T-slot and Vacuum Table
Rigid vacuum table with grids and T-slots maximizes the vacuum hold-down and also enables you to clamp the workpiece in place.
11kw Delta Inverter
It can be used in both speed control and position control similar to a servo motor drive.
Japan Yaskawa Servo Motor
Maximum speed: 6,000 min-1. Wide selection: 50 W to 1.0 kW capacity, holding
- 9kw Italy HSD ATC spindle ————————— 1 piece
- Japan YASKAWA servo motor ———————— 4 pieces
- Japan YASKAWA servo driver ———————— 4 pieces
- Germany SIEMENS control system ——————- 1 set
- 11kw DELTA inverter ——————————– 1 pieces
- T-slot & vacuum Table ——————————- 1 set
Tool Box Parts:
- Tool box ——————————- 1 piece
- Adjusting screw ———————— 4 pieces
- Clamp ———————————- 8 pieces
- Collets (ISO30) ———————- 2 pieces
- Tool, bit, cutter, mill —————- 21 pieces
- Spanner ——————————– 4 pieces
- Software CD —————————- 1 piece
- Fuse core (20A) ———————— 2 pieces
- Tool holder —————————- 4 pieces
- Fork wrench (ER32) ——————— 1 piece
- Open spanner (41-46) ——————- 1 piece
- Box key ——————————– 1 piece
- Instructions ————————— 1 piece
Advertisement: engraving and cutting of various labels and number plate, marble, etc for artistic effects on materials. Including marble, brass, steel, and other metallic material.
Crafts: engraving characters of any language and patterns on gifts and souvenirs, primitive processing and shaping of artistic crafts, and stiletto.
Moulding: engraving delicate letter and flower pattern, primitive and fine processing of the small mould.
Architectural models: engraving fine window, fencing and wall patterns, etc.
Seal: engraving seals and medal on materials such as buffalo horn, wood etc.
Label: engraving character, number, and other pattern on label for products and on product directly.
Wood processing: processing density board, stiletto for surfing board, processing of marbles, cabinet and furniture.