- Like 4*8 ATC CNC Router, the machine was designed with rotary device. The diameter and length of rotary device can be made according to your requirements.
- The rotary device includes a fixed body and a shaft. As the fourth axis of the CNC router, it can replace the X-axis or Y-axis for column processing, such as chair frames, stair frames, roman columns, columns, etc.
- Besides, the rotary device can be removed and put to your desired location. And 1530 Carousel ATC CNC Router with Rotary Device is another way to show the location of rotary device. On the other hand, rotary device can also be disassembled during transportation and processing.
- ATC CNC Router Machines were designed with tool magazine. Both 1530 ATC CNC Router Machine and this kind machine was made with linear tool magazine, which is distinct from another type of 1530-4A Woodworking CNC Router Machine.
- Different knives can be installed in tool magazine, and it’s account is allowed to be added. Over 8 sets of tools can be changed automatically to process different patterns of objects, which is unlikely to multi-spindle CNC Router.
- If you want to do three-dimensional objects or molds or more complex steps, 1530 Carousel Tool Changer CNC Router 4 Axis can give you some suggestions.
- Adopted Japan Panasonic servo motor to promise fast speed and high efficiency.
- With automatic tool sensor calibration and 5 pieces position cylinder, your will find that it is very convenient to finish work by this type.
|X,Y,Z Working Area||1500*3000*300mm|
|Z axis travel||300mm (according to your requests)|
|Table Surface||Vacuum and T-slot working table with 6 zones|
|Frame||Thicken steel Square Tube Heavy structure ,
8mm thicken steel gantry with T type
|X, Y Structure||Helical Gear and rack transmission, Taiwan PMI Linear Rail #20|
|Z Structure||Taiwan TBI Ball Screw, Taiwan PMI Linear Rail #20|
|Spindle Power||5.5kw Chang sheng water cooling spindle|
|Drive Motors||750W Japan Panasonic servo|
|Working Voltage||380V, 3Ph, 60Hz ( 220V for optional)|
|Operating System||Taiwan LNC control system with MPG hand wheel|
|Lubrication system||Automatic oil lubrication system|
Automatic tool sensor calibration
|Inverter||5.5KW Fuling inverter|
|Position||5 pieces Position cylinder|
|Vacuum pump||4KW German Becker vacuum pump|
|Rotary device||Rotary device(Diameter in 200mm)|
PS: All the working area and specifications can be customized according to your requests.
The Whole Machine Show
Chang sheng Water Cooling Spindle