- Heavy duty frame and gantry makes this machine durable.
- The machine was designed with two spindles, which works one by one and with different tool/bits.
- Being equipped with a 400 mm diameter rotating device in the Y axis direction, the machine can be used to process the cylinder, which is different from 3 Axis CNC router Machine.
- With DSP control system, it is easy to use and operate.
- If you need more on auto tool/bit changing, ATC CNC Router Machine can provided for your reference.
- Multi spindles can work with non-stop for one tool/bits changing, this improves the engraving efficiency.
- The spindle and working area can be customized according your requirement.
- Please notice that it is an economical processing machine.
- The machine can be widely used for furniture (table legs, chair legs), stair handrails, sculptures, 3D relief and so on.
- 1500*3000*300mm effective working area
- 3kw HQD air cooling spindle (2 spindles)
- 3.7kw Fuling inverter
- FL118 stepper motor and YAKO2811 big driver
- DSP A123 control system
- 20mm original Sweden SKF group international advanced self-lubricant linear guide
- French Schneider safety switch;
- Vacuum and T-slot working table
- Japan OMRON limit switch for X, Y, Z axis
- Highly flexible towline, fire-resistant double-sheathed Shanghai Gardiff cable with UL certificate
- 10~12mm Heavy duty Body
- 5.5kw water vacuum pump
- Newest double bags dust collection system with CE certificate
- Manual lubrication System
- 400mm diameter*3000mm length rotary
- Mist spray cooling system
- Artcam 2012 software for free;
- Tool sensor calibration