- Support various docking furniture design production software with opening worktable port；
- Without any software, direct blind play, truly intelligent production；
- This is one typical of Wooden Furniture CNC, which is distinct from 1530 CNC Nesting Machining Centers for Wooden Furniture.
- Like all of the CNC Router Machines, using the latest control system: the machine operate with high speed;
- Various punch patterns: Freedom of switching to meet the production requirements of various processes；
- Like to ELECNC-1325 Bi-Zone Pneumatic Multi Spindles CNC Engraving Router, the machine is simple to use: Zero-based staff are qualified for operation after only one hour of professional training. While saving in labor costs.
- Please notice that all the specifications can be customized according to your special requirements.
|Spindle||2.2kw air cooling spindle( China famous brand)|
|Effective travel of table||2650mm|
|Height of table||800mm|
|Drive and motor||servo motor and drive|
|Sensor||Germany or American brand|
|Inverter||China famous brand BEST|
|Transmission||Germany Rack and pinion ; Taiwan linear guide|
|Electrical elements||CHNT brand|
- Rails and spindle must be cleaned (by air gun) every 5 hours of machines’ processing, and the oil is used twice per shift（8 hours for per shift). If the machine’s sliding track and spindle is found to be damaged for lack of oil or cleaning, the machine is not under the warranty.
- Making sure to loosen the locking screw on the left side of the counter when lifting the spindle. And the locking screw must be tighten after adjusting, prevent the hand wheel from being damaged.
- The machine’s power supply is three-phase with five-wire. The three-phase fire wire isnamed as L1, L2, L3, N is means zero wire, and PE stand for ground wire which must be grounded. The working voltage of machine should be between 360V and 400V. The voltage regulator must be installed when the working voltage is unstable. If the electrical components is checked to be damaged by wiring errors or voltage instability, the machine is not covered by the warranty.
- The laser probe is a precision component. Under the normal circumstance, the two keys (+, -) shouldn’t be moved. Please don’t disassemble the laser probe when encountering problems of punching holes or some else. Remember to contact after-sales engineers at once.
- Before the stage of using, the protection cover of motor (behind the head stock) should be removed in time. When the machine is running, no debris or standing people should be placed around it. Or the motor may be damaged or the people have the risk of injuring.
- Don’t disassemble or adjust the inverter, controller and other electrical components inside the electrical cabinet privately. Remember to contact the manufacturer when encountering problems.
- The speed of drilling should be reduced appropriately when encountering hard wood or solid wood board.