• There are two kinds of ATC CNC Router Machines, and this machine was designed with  linear tool change. while, the machine also can be made with carousel tool changer, just like 1530 ATC CNC Router for Making Cabinet.
  • This is one of the typical 3 axis CNC Wood Router, and it has some similarities with 1325 Linear ATC Wood CNC Router.
  • Compared with Multi-head cnc router, ATC CNC Routers can change more than can change more than 8 sets of tools automatically in the engraving process.
  • Featuring Italian high frequency air-cooling electronic spindle and world-class servo motor and driving system;
  • Rigid vacuum table with grids and T-slots maximizes the vacuum hold-down power and also enables you to clamp the workpiece in place.
  • The working size and processing area can be greatly increased. In that case, the working efficiency can be greatly promoted.

Technical Parameters:

Working Size 1300*2500*200mm(Can be customized)
Traveling Positioning Accuracy ±0.03/300mm
Spindle Power 9KW Italy HSD ATC air cooling spindle
Spindle Speed 24000RPM
X, Y axis Helical rack, Hiwin 25# Rail Linear Bearing
Z axis Hiwin Rail 25# Linear Bearing & TBI Ball Screw
Max. Rapid Travel Rate 40000mm/min
Max. Working Speed 25000mm/min
Servo motor driver Germany SIEMENS servo motor and driver
Inverter 11kw DELTA inverter
Control System Germany SIEMENS 808D control system
Table surface T-slot & vacuum Table
Frame Welded Structure
Collet ISO30
X,Y Resolution <0.01mm
Software Compatibility Type3/UcancameV9/Artcam Software
Running Environment Temperature 0 – 45 Centigrade
Relative Humidity 30% – 75%
PS:All the working area and specifications can be customized according to your requests.

Close-up Pictures:


  • Italy 9kw HSD Air Cooling Spindle
    Top brand of the world. Spindle speed: 0-24000RPM


  • SIEMENS 808D Controller
    Thanks to its panel based design philosophy, and IP65’s protection level, the SINUMERIK 808 series is ideal for harsh environments.


  • ATC Tool Magazine
    1325 automatic tool changer magazine with 8 tools.


  • Japan Yaskawa Servo Motor
    Maximum speed: 6,000 min-1. Wide selection: 50 W to 1.0 kW capacity, holding


  • 11kw Delta Inverter
    It can be used in both speed control and position control similar to a servo motor drive.


  • T-slot and Vacuum Table
    Rigid vacuum table with grids and T-slots maximizes the vacuum hold-down and also enables you to clamp the workpiece in place.