- High-performance machine with extraordinary value, but at a very economical price;
- There are two kinds of ATC CNC Router Machines according to tool changer type: Linear tool changer on the end of bed and Carousel tool magazine usually set on some place of the crossbeam, read more.
- This type of machine is manufactured with a removable rotary device. And it’s diameter and length can be made according to your requirements.The machine is equipped with Italy HSD ATC air cooling spindle, and it’s speed can be reached to 24000RPM.
- Rigid vacuum table with grids and T-slots, maximize the vacuum hold-down power and also enables you to clamp the workpiece in place.
Parameters of 1325 atc cnc router:
|X,Y,Z Working Area||1300x2500x200mm|
|X,Y,Z Traveling Positioning Accuracy||±0.03/300mm|
|X,Y,Z Repositioning Accuracy||±0.03mm|
|Table Surface||Vacuum and T-slot working table|
|X, Y Structure||Rack and Pinion Drive, Hiwin Rail Linear Bearings|
|Z Structure||Hiwin Rail Linear Bearings and TBI Ball Screw|
|Max. Power Consumption||(Without Spindle) 3.2Kw|
|Max. Rapid Travel Rate||33000mm/min|
|Max. Working Speed||25000mm/min|
|Spindle Power||9kw Italy HSD ATC air cooling spindle|
|Drive Motors||850W Japan YASKAWA servo motor|
|Working Voltage||380v, 3 phase, 50/60HZ(Option: AC220V/50/60Hz,3PH)|
|Command Language||G Code|
|Operating System||Taiwan SYNTEC control System|
|Rotary device||300mm diameter*2500mm length|
|Software Compatibility||Type3/UcancameV9 Software, (Option: Artcam Software)|
|Running Environment Temperature||0 – 45 Centigrade|
|Relative Humidity||30% – 75%|
PS:All the working area and specifications can be customized according to your requests.