Leadshine Hybrid servo 2206

Closed-loop control technology, and AC servo system does not lose step.

Effectively reduce the motor heat.

Reduce motor acceleration and deceleration and high-speed positioning response time.

There is no shock when the motor stops.

The motor running more stable and more accurate

Leadshine  stepper driver

  • MA860H
  • DM1182
  • M542
  • Leadshine Hybrid servo
  • The MA860H Stepper Driver Board Controller is a high performance microstepping driver based on pure-sinusoidal current control technology. With this technology and the self-adjustment technology for different motors, the drive motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the markets.
  • Drive DM1182
    DM Series Classis Analog Stepper Drives
    Step & direction or CW/CCW control
    Extra low noise; extra low motor heating; smooth motor movement
    Easy setup via DIP switches for microstepping resolution and output current
    Free software for fine tuning, output current, resolutions…
    Automatic stepper motor identification and self configuration
  • Leadshine Hybrid servo
    Closed-loop control technology, and AC servo system does not lose step.
    Effectively reduce the motor heat.
    Reduce motor acceleration and deceleration and high-speed positioning response time.
    There is no shock when the motor stops.
    The motor running more stable and more accurate