I used to think one blade could do everything. But when I cut into plywood, the top layer peeled. The edges tore up so badly that I had to scrap the entire sheet. That mistake didn’t just cost me money—it wasted my time and slowed down my entire project.

After that, I knew I had to find the right blade. But with so many options out there, it wasn’t easy. Some blades claimed to be “made for plywood,” yet still caused splintering. Others dulled too quickly, forcing constant replacements.

That’s why I created this guide. I’ve tested and researched the best table saw blades for plywood, focusing on what really matters:

• Clean, splinter-free cuts
• Durability
• Value for money

Whether you run a fabrication shop or handle occasional plywood projects, you’ll get real recommendations—no fluff.

By the end, you’ll know which blade to trust for your plywood cuts—without wasting good material.

Let’s dive in!

Comparison Table

Choosing the right table saw blade for plywood can make the difference between smooth, splinter-free cuts and wasted material. This comparison table breaks down the top 7 blades, highlighting their key features, durability, and best uses to help you find the perfect fit for your business:

1. Freud LU80R010 10-Inch 80 Tooth Ultimate Plywood & Melamine Blade

This 10-inch, 80-tooth carbide-tipped blade is built for smooth, chip-free cuts in plywood, melamine, and veneered panels. Unlike standard saw blades, it features a Hi-ATB (High Alternate Top Bevel) tooth design, which helps minimize splintering by slicing through wood fibers cleanly.

Freud is known for high-quality saw blades, and the LU80R010 is no exception. It’s designed for precision work, making it a go-to for professionals who need flawless cuts right off the saw.

What Makes This Blade Stand Out?

Not all plywood blades deliver on their promises. While many advertise splinter-free performance, few can match the precision of the Freud LU80R010. Here’s what sets it apart:

• Hi-ATB Tooth Geometry: The 80 teeth are angled for a shearing action that minimizes tear-out and delivers ultra-smooth cuts.
• Perma-Shield Coating: This non-stick layer resists heat, gumming, and corrosion—helping the blade stay sharper for longer.
• Laser-Cut Stabilizer Vents: These reduce vibration, keeping cuts accurate and clean even under demanding conditions.
• Full-Kerf Design: Offers more blade stability than thin-kerf alternatives, especially valuable for precision jobs requiring maximum control.

If your shop relies on clean, consistent plywood cuts, this blade delivers the finish you expect—without the post-cut cleanup.

Cut Quality

Does tooth count matter? Absolutely—especially for fragile materials like plywood, melamine, and laminates. The 80-tooth configuration of the LU80R010 is optimized for fine-finish cutting.

• Higher Tooth Count = Smoother Cuts: More teeth mean finer bites, resulting in cleaner edges and less splintering.
• Hi-ATB Design: Teeth are engineered to slice rather than tear, giving your cuts a polished, glass-like finish.
• Minimal Tear-Out: Even on veneered and pre-finished surfaces, this blade minimizes chipping and damage.

If sanding plywood edges is eating into your production time, switching to this blade could streamline your workflow.

Durability: How Long Does It Last?

Blade longevity is critical—especially in high-output shops. The LU80R010 is built to last under pressure:

• Carbide-Tipped Teeth: Uses premium high-density carbide to hold a sharp edge longer, even through frequent use.
• Perma-Shield Coating: Prevents excessive heat and pitch buildup, reducing the chance of early dulling.
• Laser-Cut Body: Precision manufacturing helps maintain flatness and resist warping over time.

With regular maintenance, this blade can serve reliably for months—or even longer—depending on your cutting volume. For production environments, it offers long-term performance that justifies the investment.

2. DEWALT 10-Inch Miter/Table Saw Blade, 60-Tooth, 2-Pack (DW3106P5D60I)

I’ve been in situations where a single blade wasn’t enough to get through a job. A project would start strong, but by the time I was halfway through a stack of plywood, the blade had dulled. Swapping blades mid-job meant lost time, inconsistent cuts, and added frustration.

That’s why a two-pack matters. The DEWALT 10-inch 60-tooth blade set gives you backup when you need it most—without scrambling for a replacement. But are these blades good enough for high-volume work? Let’s find out.

What Makes This Blade Set Stand Out?

Buying in bulk doesn’t always equal quality—many multi-packs are filled with low-grade blades that dull fast. That’s not the case here. DEWALT engineered this two-blade set for business buyers, offering a smart mix of performance and value.

• Two Blades = Less Downtime: With a backup blade included, you reduce unexpected delays during high-output projects.
• Thin-Kerf Design for Faster Cuts: Requires less cutting force, reducing strain on your saw motor and improving efficiency.
• Computer-Balanced Plates: Delivers smooth, controlled cutting with less vibration and less operator fatigue.
• Tougher Carbide Teeth: Stays sharper longer than standard carbide—resulting in more cuts per blade.

For high-volume woodshops or job sites, this set brings cost-effective consistency without sacrificing quality.

Cut Quality

Why 60 teeth instead of 80? It comes down to finding the right balance between speed and finish.

• 60 Teeth = Faster Cuts: Lower tooth count allows faster feed rates, ideal for high-volume jobs.
• Alternate Top Bevel (ATB) Design: Slices through wood fibers cleanly, reducing splintering on plywood and composites.
• Clean Crosscuts Without Tear-Out: While 80T is better for ultra-fine finishes, this 60T blade still delivers smooth results across most plywood types.

For cabinet shops, furniture makers, and on-site construction crews, this blade offers speed, efficiency, and reliable cut quality.

Durability: How Long Does It Last?

A two-pack makes sense only if the blades hold up under pressure. DEWALT’s build quality answers that need.

• Tungsten Carbide Teeth: Outperforms standard carbide in edge retention and overall durability.
• Heat-Resistant Coating: Prevents pitch buildup and friction-related damage, helping maintain cut quality.
• Low-Vibration Design: Reduces stress on each tooth, resulting in longer lifespan and cleaner cuts over time.

While it won’t outlast high-end industrial blades, this set hits the sweet spot for shops looking for scalable performance at a manageable cost.

3. IRWIN Marples 10-Inch 84-Tooth Circular Saw Blade (1807381)

This is a high-tooth-count finishing blade designed for plywood, melamine, and veneered panels. At 84 teeth, it delivers a finer cut than standard 60- or 80-tooth options, making it ideal for cabinetry, furniture making, and precision work.

What makes this blade different is its combination of thin kerf and high-grade carbide teeth. It’s built for clean, smooth edges with minimal tear-out, reducing the need for sanding or rework.

If you need a blade that prioritizes cut quality over speed, this is one to consider.

What Makes This Blade Stand Out?

Most blades make you choose: cut speed or finish quality. The IRWIN Marples 84-Tooth Blade delivers both—without compromising on durability.

• Tri-Metal Brazing for Stronger Teeth: Reinforced bonding helps the teeth stay intact longer, even under demanding workloads.
• Extra-High Tooth Count for Finish Cuts: With 84 teeth, this blade produces a near-polished edge—ideal for premium woodworking.
• Laser-Cut Expansion Slots: Prevents warping during high-heat operations, keeping cuts straight and consistent.
• Thin Kerf for Less Waste: Reduces material loss, making it ideal when working with high-cost plywood, veneers, and laminates.

For businesses focused on clean finishes and efficient production, this blade offers a high-performance solution that’s ready for daily use.

Cut Quality

Does tooth count really impact results? Absolutely—if the blade is engineered right.

• 84 Teeth = Ultra-Smooth Finish: Smaller, more frequent cuts reduce splintering and edge roughness.
• Alternate Top Bevel (ATB) Design: Slices wood fibers cleanly, delivering crisp, splinter-free edges.
• Minimal Tear-Out on Veneer & Melamine: Ideal for fragile materials, including pre-finished plywood, melamine, and fine veneers.

If your work demands a clean edge straight from the saw, this blade helps reduce rework and sanding—saving time and labor.

Durability: How Long Does It Last?

High-tooth-count blades often dull quickly—but this one’s built for longer use in professional settings.

• C4 Micro-Grain Carbide Teeth: Engineered for long-lasting sharpness and high wear resistance.
• Heat-Resistant Coating: Minimizes friction and prevents resin or glue buildup.
• Tri-Metal Bonding: Strengthens tooth retention, even during repeated heavy cuts.

I’ve seen plenty of finish blades lose their edge fast, especially on laminated boards—but this one held up longer than expected. I remember using it on pre-finished plywood for a custom cabinet run, and the edges came out clean, ready for install.

4. Diablo by Freud D1060X 10-Inch 60 Tooth Fine Finish Saw Blade

I’ve worked with plenty of saw blades that claimed to deliver fine cuts, only to end up with splintered plywood and extra sanding work. That’s wasted time and money—two things no business can afford.

The Diablo D1060X 60-Tooth Fine Finish Blade promises clean cuts without the slow feed rate of higher tooth-count blades. But does it really balance speed and finish quality? Let’s break it down.

What Makes This Blade Stand Out?

Many fine finish blades wear out fast or cut too slowly. The Diablo D1060X solves both problems. It’s engineered for speed, precision, and long-term use, making it ideal for high-demand workshops.

• Ultra-Thin Kerf for Less Resistance: Cuts faster with reduced strain on your saw motor, boosting productivity.
• TiCo High-Density Carbide Teeth: Maintains a sharp edge longer—ideal for high-volume or repetitive cuts.
• Non-Stick Perma-SHIELD Coating: Reduces friction, gumming, and heat buildup from adhesives or resins.
• Laser-Cut Stabilizer Vents: Minimizes vibration for quieter, straighter, and more accurate cuts.

If you need a blade that can keep up with fast-paced work without compromising cut quality, the D1060X is a smart investment.

Cut Quality

A 60-tooth blade might not sound like a finish blade—but Diablo’s engineering makes it cut like one.

• 60 Teeth = Smooth, Fast Cuts: Offers a balance between cutting speed and clean edge quality—ideal for both rip and crosscuts.
• Hi-ATB Tooth Geometry: Teeth are angled steeply to shear wood fibers cleanly, reducing tear-out and splintering.
• Versatile Across Materials: Performs well on plywood, melamine, and hardwoods—excellent for shops that switch between materials.

For cabinet makers, job shops, and manufacturers, this blade delivers speed without sacrificing finish quality.

Durability: How Long Does It Last?

Speed is great—but only if the blade holds up. The D1060X is built to outlast standard thin-kerf blades in busy production environments.

• Proprietary TiCo Carbide Blend: Tougher than standard carbide—resists chipping, even with daily use.
• Perma-SHIELD Coating: Protects against resin buildup and overheating, extending blade life.
• Laser-Cut Body: Maintains structural integrity under load, reducing blade flex and warping.

For shops cutting large volumes of sheet goods or laminated materials, this blade combines efficiency with long-lasting value.

5. Luckyway 10-Inch 60-Tooth Carbide Tip Table Saw Blade

This is a general-purpose 10-inch saw blade with 60 carbide-tipped teeth, designed for plywood, softwood, hardwood, and composite materials. It’s marketed as a cost-effective solution for contractors, machine shops, and rental companies that need a reliable blade without the high price tag.

With a thin kerf design, it’s built for fast, smooth cuts with minimal resistance, making it a practical choice for job sites and production environments that require steady output.

What Makes This Blade Stand Out?

Budget blades often mean sacrificing performance. The Luckyway 60-Tooth Blade offers a smarter alternative—balancing affordability with functional quality.

• Carbide-Tipped Teeth for Extended Use: Stays sharp longer than basic steel blades, delivering more cuts per blade.
• Thin Kerf for Faster Cutting: Requires less power and produces less waste, ideal for lighter saws or smaller setups.
• ATB (Alternate Top Bevel) Tooth Design: Delivers cleaner cuts with reduced chipping, especially on plywood and veneered surfaces.
• Affordability Without Sacrificing Performance: Consistent cutting performance at a fraction of the cost of high-end blades.

For small shops, contractors, and resellers needing a reliable low-cost option, this blade brings dependable results without constant replacements.

Cut Quality

Will a 60-tooth blade cut plywood cleanly? It depends on your finish expectations—but this blade performs well for most jobs.

• 60 Teeth for Balanced Performance: Offers a solid middle ground—cleaner than 40T blades, faster than 80T blades.
• ATB Tooth Geometry: Angled teeth help reduce splintering, delivering smoother results on both crosscuts and rips.
• Not for Ultra-Fine Finishing: May require light sanding for furniture-grade applications, but sufficient for most plywood work.

For machine dealers, fabricators, and small workshops, this blade balances cut quality and productivity without driving up costs.

Durability: How Long Does It Last?

A low-cost blade must last long enough to justify its value. The Luckyway 60T blade delivers moderate durability suited for general-purpose cutting.

• Carbide-Tipped Teeth: Offers better edge retention than all-steel alternatives, even under repeated use.
• Heat-Treated Steel Plate: Helps reduce blade warping during high-speed operation.
• Good for Light to Moderate Use: Not intended for heavy-duty production but holds up well in small to mid-volume environments.

I’ve seen this blade used in small shops where every dollar—and every cut—counts. It’s not a premium tool, but it holds its own for everyday plywood and trim work. If you’re looking for a cost-effective blade that gets the job done without burning through your budget, this one’s worth keeping on the shelf.

6. CMT 255.080.10 ITK Industrial Fine Finish Saw Blade, 10-Inch x 80 Teeth

This is a 10-inch, 80-tooth carbide-tipped saw blade, built for fine finish work in plywood, hardwoods, and laminates. It’s designed for industrial applications, meaning it can handle high-volume cutting without excessive wear.

CMT is known for making high-performance woodworking tools, and this blade follows that reputation with high-density carbide teeth, laser-cut accuracy, and anti-vibration features. If you’re cutting expensive veneer plywood or laminated materials, this blade is built to protect your investment.

What Makes This Blade Stand Out?

Many fine finish blades focus on precision but fall short on durability. The CMT ITK 80-Tooth Blade breaks that mold by delivering industrial-grade cut quality with extended blade life.

• C4 Micro-Grain Carbide Teeth: Higher density for longer life—resists dulling, chipping, and edge breakdown.
• Laser-Cut Expansion Slots: Reduces blade movement and warping during high-speed cuts.
• Non-Stick PTFE Coating: Prevents gumming and heat buildup, especially useful when cutting adhesive-laminated materials.
• Thin Kerf Design: Produces finer cuts with less material waste and requires less power from your saw.

If your operation demands precision, reliability, and consistent results, this blade is designed for heavy workloads.

Cut Quality

Clean cuts are essential—but so is eliminating rework. This blade helps deliver finish-ready cuts straight from the saw.

• 80 Teeth = Ultra-Smooth Crosscuts: Virtually eliminates tear-out on plywood and veneered boards.
• ATB Tooth Geometry: Slices wood fibers with a shearing action to reduce chipping and splintering.
• Excellent for Laminated and Veneered Materials: Ideal for furniture parts, cabinetry, and precision panels.

If your work involves delicate surfaces or pre-finished panels, this blade minimizes rework and delivers high-end results.

Durability: How Long Does It Last?

A fine finish blade needs to stay sharp under pressure. The CMT ITK is engineered for extended durability even in high-production settings.

• C4 Carbide for Long-Lasting Sharpness: Outperforms standard carbide under continuous use.
• Laser-Cut Plate with Low Vibration: Maintains structural integrity and cutting accuracy over time.
• Heat-Resistant Coating: Reduces wear from friction and resin buildup, preserving blade performance.

If your shop handles high-end materials and can’t afford constant rework, this blade won’t let you down.

7. Overpeak 10-Inch 90 Tooth ATB Ultra Fine Finishing Saw Blade

I’ve used plenty of saw blades that claimed to be “fine finish” but still left rough edges or slight tear-out. When you’re working with high-end plywood or laminated materials, even the smallest splinter can mean wasted material—and wasted money.

The Overpeak 10-Inch 90-Tooth ATB Ultra Fine Finishing Saw Blade is built for those who need perfectly smooth cuts without sanding. But does adding more teeth really improve the cut, or does it just slow you down? Let’s take a look.

What Makes This Blade Stand Out?

Most fine finish blades max out at 80 teeth. The Overpeak 90-Tooth Blade pushes the limit to deliver exceptional cut quality—ideal for shops where finish matters more than speed.

• 90-Tooth Ultra Fine Cutting Design: Delivers smooth, chip-free cuts—even on delicate veneers and laminates.
• Heavy-Duty Carbide Teeth: Designed for extended use, reducing downtime for blade changes.
• Anti-Vibration Slots: Keeps the blade stable, helping maintain accuracy through the entire cut.
• Thin Kerf for Effortless Feeding: Requires less cutting force, protecting your saw and improving overall efficiency.

If your business demands glass-like cuts and minimal touch-up, this blade is a strong performer for finish-critical applications.

Cut Quality

More teeth can mean better cuts—when properly engineered for precision work.

• 90 Teeth for Ultra-Fine Edges: Smaller tooth bites reduce tear-out and leave a smoother surface.
• ATB Tooth Geometry for Clean Shearing: Angled teeth slice wood fibers, producing clean, splinter-free finishes.
• Slower Feed Rate = Higher Precision: Not designed for speed, but forcabinet-grade accuracy.

For furniture makers, cabinet shops, and architectural woodworkers, this blade reduces sanding and rework—saving labor and time downstream.

Durability: How Long Does It Last?

High-tooth-count blades must hold an edge to be worth the investment. The Overpeak blade is built for professional use and extended service life.

• Premium Tungsten Carbide Teeth: Maintains sharpness longer than standard-grade carbide, even under repeated use.
• Heat-Treated Steel Plate: Maintains flatness and resists warping in high-heat, high-load conditions.
• Non-Stick Coating: Prevents resin buildup and friction damage, helping the blade and your saw last longer.

For businesses needing consistent performance, clean results, and durability in one package, this blade delivers excellent value over time.

Conclusion

Plywood can be tricky, but the right blade makes all the difference.These 7 table saw blades are designed to deliver clean edges, reduce tear-outs, and improve your finish.

I’ve seen my own work improve just by changing the blade. The cleaner the cut, the stronger the result.

Needing a CNC machine supplier to upgrade your production quality? At Blue Elephant, we offer high-performance tools and machines for smoother, more precise cutting.

Contact us today to get started!