Introduction:
This is a nesting CNC router machine with high efficiency for panel furniture production. It is equipped with a carousel tool magazine, automatic loading, unloading, and labeling platforms. All these configurations improve work efficiency and save labor costs significantly.
Major parameters of this CNC router
| Model | ELECNC-2130ATC |
| Working area | 2100x3000x200mm |
| Spindle | Italy 9.6kw HSD ATC air cooling spindle |
| Spindle speed | 6000-24000RPM |
| Inverter | Taiwan 11kw DELTA inverter |
| Tool magazine | Carousel type auto tool changer with 8 tools |
| Control system | Taiwan SYNTEC6MB control system with MPG handle wheel |
| Motor and driver | 850w Japan Yaskawa servo motors and drivers |
| Working Table | Vacuum and T-slot working table |
| limit switch | Japan OMRON limit switch |
| Reducer | Japan SHIMPO Reducer |
| Lubrication system | New type 1.5L big Automatic lubrication |
| Voltage | 380v, 3phase, 50HZ |
| Vacuum pump | German Becker pump/air type vacuum pump/ water circulation vacuum pump |
| Dust collector | 1.5kw double bags dust collector system |
| Tool sensor | Automatic tool sensor calibration |
Contact us to know more about this machine.
