Introduction:
This is a 4th axis CNC router machine with a working area of 1500x3000mm. It also has a rotary device on the side of the vacuum worktable. It can cut and engrave not only wooden sheets but also square, rectangle, and round sticks. This CNC router is configured with 6kw hsd air cooling spindle and DSP control system.
1530 rotary axis CNC router parameters
| Serial Number | S20191126L |
| Model | ELECNC-1530 |
| Working area | 1500*3000*300mm |
| Spindle | 6kw Italy HSD air cooling spindle |
| Inverter | 7.5kw Taiwan Delta inverter |
| Control system | DSP B18 control system |
| Motor and driver | 750w Japan Yaskawa servo motor and driver |
| Working Table | T-slot & vacuum working table |
| Voltage | 380v, 3ph, 50hz |
| Vacuum pump | 7.5kw water circulation vacuum pump |
| X,Y,Z Transmission | Helical rack gears transmission on X,Y axis Taiwan TBI ball screw transmission on Z axis |
| X,Y,Z Rail | Taiwan linear guide rails for X,Y,Z axis |
| Dust collector | 1.5kw new type double bag dust collector |
| Software Compatibility | Artcam software |
Contact us to know more information.
