Press the key OFFSET ,you will see the windows ,like the picture .

The mark. Press the key ④.

You will see the R variable.

R11-R18 : TOOL1-8 X LOCATION

R31-R38: TOOL1-8 Y LOCATION

R51-R58: TOOL1-8 Z LOCATION

Then how to get the number .here is an example .

T1.

HERE IS THE STEPS

1, the spindle must be have a tool .

2 Use MPG move the tool to the T1 location.

Yes ,the location is the loose tool and catch tool location .

Then now we do not move the machine ,back to the screen .

Check the Machine coordinate

Yes (here is an example, the number) .

X: 150.0 R11: 150.0

Y: 150.0 R31: 150.0

Z: -100.0 R51:-100.0

3 loose tool .then up .

R42: after loose the tool the z axis will up to the point .

R43:after catch the tool the machine will move to this point .

R30: the tool sensor Xcoordinate

R40: the tool sensor Ycoordinate

R41: The shortest tool can touch the sensor Z coordinate

All the number is coordinate number ,it is not the distanc.all the number is the Machine coordinate number .

R101 lifting knife

R102 Cutter