The rotary

Blue elephant conk router.

1, Introduction

1): Key for the three jaw chuck 7): Wheel

2): Three jaw chuck 8): Set screw

3): Motor and gear box 9）：Tailstock center

4): Jaw 10）：Locking block

5): Tailstock 11）:Slider

6): liner 12）：Locking block screw.

2, Installing and fixing workpiece

a: loose the 8) Set screw,let the ,let the 9）：Tailstock center free.

b: loose 12)Locking block screw, let the 5): Tailstock free.like the picture .

c: Use 1): Key for the three jaw chuck. let the jaw distance bigger than the workpiece diameter.

Like this .

Then install the workpiece. Clamp the workpiece by the key .

d: Adjust the 5): Tailstock , let 9）：Tailstock center in the center of workpiece.

e: Tight the screw.

Adjust10）：Locking block,Tight Locking block screw,do not let the block move ,then 5): Tailstock

can not move .

f: Adjust the 9）：Tailstock center, do not let the workpiece have space to move.

Tight the 8): Set screw, Tailstock center will not move.

Ok finish.

3, Set workpiece zero point .

Here is an example .

My workpiece look like this .

Move tool to here.

Then ,Control system

Ok .Move z axis up ,give machine a safe distance .

1, load G-code

2, Spindle turn on . let the spindle work first .

3, Cycle start , start work .

Am real example ;

The rotary is parallel to the Y axis。

(if your rotary is parallel to the x axis,just Replace the Y axis with X, Except for the second line.)