The steps are as follows.

The first part is setting of workpiece zero point.

1.Move tool

2.When the tool is near workpiece,press”MODE”button,change “ContinueMode” to “StepMode”.

3.The Z axis will move step by step.

4.Now the tool has touched workpiece,PRESS “X/Y→0”, please notice the coordinate

5.PRESS “Z/C→0”, choose “clear Z”,please notice the coordinate

The second part is file selection and working

1.Press”Z+”,raise tool.

2.Press”FILE”,choose “Internal File” For example,we select the file named “SONIC.TXT”,press “RUN/PAUSE/DELETE”button,

3.Enter”start speed setting”interface The “Y+(F+%)”and”Y+(F-%)” button is for adjusting “Feed Speed”.

The video is as follow.