This fiber laser marking machine adopts desktop marking, it takes up little space and easy to use. And it has the advantages of good beam quality, fast speed, long working life, flexible installation, etc.
1. It can process a variety of metal and non-metal materials, especially for marking high hardness, high melting point and brittle materials.
2. It belongs to non-contact processing with good marking quality, no damage to the product, and no tool wear.
3. The laser beam is very thin; the processing heat affected zone is small and the processing material is consumed very small either.
4. Adopting computer control, it is easy to achieve automation and has high processing efficiency.
5. Small volume, light weight, and high speed.
| Laser source | Fiber laser |
| Power | 20W, 30W, 50W, 100W, optional |
| Working area | 110x100mm, 200x200mm, 300x300mm, optional |
| Marking speed | ≤12000mm/s |
| Marking depth | ≤1.2mm |
| Repetition precision | ±0.01mm |
| Working voltage | 110V/220V, 50/60Hz |
| Working temperature | 0-45℃ |
| Working humidity | 5-95% |
Most metal materials and certain non-metal materials. For instance, aluminum, copper, stainless steel, tungsten, nickel, zinc alloy, fiberglass, carbon fiber, non-semiconductor ceramics, some plastics, etc.
Not recommend. You can use a CO2 laser marking machine to mark glass. The CO2 laser marking machine is usually used to mark plastic, paper, glass, acrylic, leather, wood, and other non-metal materials. While the fiber laser marking machine is used to mark various metals.
The major difference between laser marking and engraving is the processing depth on the material surface. Laser marking discolors the surface to display patterns, while laser engraving actually removes partial surface materials. The professing depth of laser engraving is larger than laser marking.
For any inquiries, don’t hesitate to contact us at:
Get the full product pricing or technical details — we’re ready to assist you right away!
